- 您现在的位置：买卖IC网 > Sheet目录1200 > CC-ACC-ADD-2443 (Digi International)BRD AUDIO ADD-0N CC 2443 KIT
Chapter 2
Use the user push-buttons to interact with the applications running on the module.
Use these module signals to implement the push-buttons :
Signal name
USER_PUSH_BUTTON_1
USER_PUSH_BUTTON_2
Switch
(pushbutton
S3
S5
GPIO used
GPF0
GPF6
Legend for multi-
pin switches
Module
Switches S4, S6, and S7 are multi-pin switches. In the description tables for these
switches, the pin is designated as S[switch number].[pin number] . For example, pin
1 in switch 2 is specified as S4.1.
Use S4 to configure the module:
configuration
switches, S4
Dip-
switch
position
1
2
3
4
5
6
7
8
Usage
DEBUGEN#
WRT Protect NAND FLASH
CONF2/VD0 (not used)
CONF3/VD1 (not used)
CONF4/VD8 (not used)
CONF5/VD9 (not used)
CONF6/VD16 (not used)
CONF7/VD17 (not used)
Serial port B MEI
configuration
switches
Use S6 to configure the line interface for serial port B MEI.
Switch
pin
S6.1
S6.2
Function
On = RS232 transceiver enabled
RS422/RS485 transceiver disabled
Off= RS232 transceiver disabled
RS422/RS485 transceivers enabled
On = Auto Power Down enabled
Off = Auto Power Down disabled
Comments
Auto Power Down is not supported on
this board. This signal is only accessible
to permit the user to completely disable
the MEI interface for using signals for
other purposes. To disable the MEI
interface go in RS232 mode (S6.1 = ON)
and activate the Auto Power Down
feature (S6.2 = ON). Be sure that no
cable is connected to connector X3.
69
ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
CC-EVB-FAX
KIT EVAL WORLD MODEM II FAX
CC-USB-SR
ADAPTER USB TO SOCKET INTRFC
CC-USB232-C10
ADAPTER USB TO RS-232 CABLE
CDB150X-01-Z
DEVELOPMENT BOARD FOR CS1501
CDB1601-120W-Z
DEVELOPMENT BOARD FOR CS1601
CDB35L00
DEVELOPMENT BOARD FOR CS35L0X
CDB4207
BOARD EVALUATION FOR CS4207
CDB4245
BOARD EVAL FOR CS4245 CODEC
相关代理商/技术参数
CC-ACC-DB9C
制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-9C/9C
CC-ACC-DB9P
制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DB9P-9215
制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 9215 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DBMX51
制造商:Digi International Inc 功能描述:BOARD DEV CONNECTCORE I.MX51 制造商:Digi International Inc 功能描述:JumpStart Kit Baseboard and Power Supply for ConnectCore Wi-i.MX51 w/o Module
CC-ACC-DBMX-51
制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-I.MX51
CC-ACC-ETHMX
制造商:Digi International Inc 功能描述:SECOND ETHERNET CHANNEL ADAPTER, ADAPTER TO CONNECT TO SECOND - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:IC MICROCONTROLLER 制造商:Digi International Inc 功能描述:Second Ethernet Channel Adapter
CC-ACC-LCD-70WV
功能描述:7" LCD ACCESSORY KIT FOR CONNECT 制造商:digi international 系列:- 零件状态:在售 触摸屏:电容性 屏幕对角线尺寸:7"（177.80mm） 点像素:800 x 480（WVGA） 标准包装:1
CC-ACC-LCDQ-28
功能描述:显示开发工具 Digi Embedded ARM 2.8" LCD Display RoHS:否 制造商:4D Systems 产品:4Display Shields 工具用于评估:?OLED-160-G1, ?OLED-160-G2 接口类型:Serial 工作电源电压:5 V